top of page

Gecko In-Therm Heat Pump - 5kw Smart Air Source Heat Pump.


The in.temp is one of the most economical hot tub air source heat pump, which only runs on Gecko controls. Saving up to 75% on heating costs and offering 6 different modes of operation. Only compatible with Gecko IN.YT, IN.YE and IN.YJ systems and fully controlled through the hot tub keypad.


This Air Source Heat Pump requires 500mm clearance on the rear and sides minimum, and 2000mm on the front (fan) side.


Comes with power lead, communication lead, drain hose and manual.


For supply only, you will need to source additional plumbing fittings to connect the unit to your hot tub, swim spa or pool, in addition to pipe lagging (insulation). 


For standard installation, this includes plumbing the heat pump close to the hot tub, swim spa or pool, within the recommended parameters. Supply and fitting all plumbing, lagging (insulation) and labour included, within our service area only.


If you are located outside our service area, or require a more complicated installation due to locating the heat pump further away for example, then please contact us.


If you are interested and ready for an air source heat pump installation, then contact us today for a no-obligation site survey to check on installation prior to ordering. Email us at

Gecko In-Therm Heat Pump

PriceFrom £1,850.00
  • Feature Info
    Heat Pump Size 5Kw
    Model Style Smart Heat Pump
    Measurements (L/D/H) 850mm x 390mm x 572mm
    Capacity Kw 3.87kw - 5.54kw
    Power Draw 0.87kw - 1.29kw
    Power Supply

    220v-240v 50HZ Single Phase

    500cm (3-core included)

    Air Temp Operating Range -5℃ to 43 ℃
    Heating Range 8℃ to 40℃
    Max Water Volume Unknown
    Sound (DB@1m) 51
    Plumbing Fittings 1.5"
    Heat Exchanger Titanium
    Refridgerant R32
    Flow Rate Required 2.27 mh3 
    Cooling Function Yes
    Input Line Control Yes
    Inline Pump Power Supply No
    Wifi Control No
    Unit Weight 45kg
    Claimed Energy Saving Up to 75%
bottom of page